Heat Pump Projects

Mitsubishi Hyper-Heat and Heat Pump Water Heater Upgrade in Berkeley

Mitsubishi Hyper-Heat system and 65-gallon heat pump water heater installed as part of a home comfort upgrade in Berkeley.

Completed September 26, 2026

View project →

Carrier Heat Pump System Replacement in San Francisco

Carrier 60,000 BTU variable-speed heat pump selected for a full HVAC system replacement in San Francisco.

Completed September 26, 2026

View project →

Carrier Full HVAC System Installation in Concord

Carrier 24,000 BTU variable-speed heat pump installed as part of a complete heating and cooling system upgrade in Concord.

Completed March 26, 2026

View project →

Mitsubishi In-Ceiling Heat Pump Systems in San Francisco

Two Mitsubishi M-Series heat pump systems installed to provide in-ceiling heating and cooling for a four-story San Francisco home with radiant heat.

Completed October 10, 2026

View project →

Midea Heat Pump System Replacement in Oakland

Complete Midea 24,000 BTU variable-speed heat pump system replacement completed for a home in Oakland

Completed October 21, 2026

View project →

Carrier Heat Pump Installation in Walnut Creek

HVAC replacement project for a 2,700 sq. ft. single-story home, with a focus on comfort, proper system sizing, and ductwork improvements.

Completed May 26, 2026

View project →

American Standard Dual-Fuel Heat Pump and Furnace Installation in Hercules

Replaced a nine-year-old air conditioner and 23-year-old furnace with an American Standard 4-ton inverter heat pump and an 80% AFUE two-stage gas furnace. The new dual-fuel system combines electric heating and cooling with the option of gas heat.

Completed June 25, 2026

View project →

American Standard Central Heat Pump Installation for a Ranch-Style Home in Pinole

Upgraded a 2,300-square-foot ranch-style home with an American Standard 4-ton inverter heat pump and matching horizontal evaporator coil. The project included a Nest WiFi thermostat, enlarged return filter grille, new refrigerant line set, and electrical and attic installation improvements.

Completed July 23, 2026

View project →

Mitsubishi SUZ-AK48NL heat pump installation in Cupertino

Replaced a 19-year-old gas furnace and 5-ton AC system with a Mitsubishi SUZ-AK48NL heat pump and SVZ-AP48NL air handler. Installation included a new refrigerant line set, MHK2 thermostat, kumo cloud connectivity, and extended 12-year labor coverage alongside the manufacturer’s 12-year parts warrant

Completed April 14, 2026

View project →

Mitsubishi Single-Zone Mini-Split in Pittsburg

Mitsubishi single-zone mini-split outdoor unit installed for a home in Concord.

View project →

Mitsubishi SMART MULTI Heat Pump in San Mateo

Mitsubishi SMART MULTI heat pump outdoor unit installed for a home in San Mateo.

View project →

Rooftop Mitsubishi Heat Pump in Burlingame

Mitsubishi heat pump outdoor unit installed on a commercial rooftop in Burlingame.

View project →

American Standard Heat Pump in Alameda

American Standard heat pump outdoor condenser installed on a pad in Alameda.

View story →

Carrier Ductless Heat Pump in Pacifica

Carrier 3-ton ductless heat pump (37MUHAQ36) installed in Pacifica. The homeowner's old gas furnace was removed and replaced with this high-efficiency heat pump — adding cooling for the first time while keeping the home warm through the winter. Refrigerant lines run through a white line-hide cover up the wall to the indoor unit, with a new disconnect beside the unit. Completed November 2, 2026.

View story →

Mitsubishi Mini-Split Outdoor Units in San Francisco

Two Mitsubishi Electric outdoor units set on level equipment pads beside a San Francisco home, with wall-mounted disconnects and neatly routed refrigerant lines. The 15,000 BTU single-zone mini-split system was installed with proper city permits, and full paperwork was handed over to the homeowner. Completed October 1, 2026.

View story →

Side-Discharge Heat Pump in Concord

A compact Carrier heat pump positioned beside the home on an equipment pad, with a nearby wall-mounted electrical disconnect. The side-discharge design offers a lower-profile alternative to a traditional top-discharge unit.

View story →

Dual Heat Pumps in Danville

Two Carrier heat pumps set on individual equipment pads alongside a landscaped yard. The photo shows the equipment placement and insulated refrigerant connections for a two-unit installation.

View story →

Wall-Mounted Mini-Split in Hayward

A wall-mounted mini-split indoor unit positioned high above a window during a room renovation. Its placement leaves the floor area open while delivering conditioned air directly into the room.

View story →

Ductless Indoor Unit in Pleasanton

A close-up of a wall-mounted ductless indoor unit, showing its compact cabinet and air outlet. This style of installation provides room-level comfort without a floor-standing indoor appliance.

View story →

Dual-Fan Outdoor Unit in Orinda

A Mitsubishi Electric dual-fan outdoor unit positioned beside the home’s blue siding, with refrigerant piping routed along the wall. The installation keeps the outdoor equipment close to the building.

View story →

Wall-Mounted Mini-Split in San Francisco

A ductless indoor unit mounted near the ceiling, leaving the wall and floor space below available for everyday use. The photo shows how a compact indoor unit fits into an existing room.

View story →

Room Mini-Split in Oakland

A wall-mounted mini-split integrated into a finished room, above the window and beside a dark accent wall. The compact indoor unit provides a room-level comfort option without taking up floor space.

View story →

Compact Outdoor Unit in Walnut Creek

A compact Mitsubishi Electric outdoor unit set on an equipment pad beside the house. A covered line-set route follows the exterior wall, keeping the visible piping grouped together.

View story →

Dual-Fan Heat Pump in Brentwood

A Mitsubishi Electric dual-fan heat pump installed alongside the home on an equipment pad. The photo shows the tall outdoor cabinet, nearby disconnect, and wall-routed connections.

View story →

Multi-Zone Heat Pump in San Jose

A Mitsubishi SMART MULTI dual-fan condenser set on a level pad with a wall-mounted disconnect, providing efficient zoned heating and cooling for multiple rooms in this San Jose home.

View story →

Heat Pump in Union City

A Carrier heat pump installed on a new equipment pad beside the garage of this Union City home, giving the homeowner all-electric heating and cooling from a single system.

View story →

Heat Pump in Livermore

A space-saving Daikin heat pump tucked neatly into a narrow side yard — a practical setup for Livermore homes, ready for the area’s hot summers and cool winters.

View story →

30,000 BTU Heat Pump in San Francisco

A 30,000 BTU Mitsubishi heat pump installed for a San Francisco home — quiet, efficient, all-electric comfort that suits the city’s mild, foggy climate.

View story →

Rooftop Heat Pump in San Francisco

A Mitsubishi heat pump installed on the roof of a San Francisco home — a practical solution where ground-level space is limited in the city’s tightly packed neighborhoods.

View story →

3-Zone Heat Pump in Alamo

A Mitsubishi three-zone heat pump system for an Alamo home, conditioning three separate areas independently for room-by-room comfort and energy savings.

View story →

SMART MULTI Heat Pump in Diablo

A Mitsubishi SMART MULTI system installed for a Diablo residence, pairing a single outdoor unit with multiple indoor zones for flexible, high-efficiency comfort.

View story →

Heat Pump in Fremont

A Mitsubishi heat pump installed for a Fremont home making the move to clean, efficient electric heating and cooling.

View story →

Heat Pump in Alameda

A Carrier heat pump providing reliable, year-round comfort for a home on the island of Alameda.

View story →

RDAY18 Heat Pump in Lafayette

A Rheem RDAY18 heat pump installed for a Lafayette home — an efficient, all-electric upgrade suited to the East Bay hills’ variable climate.

View story →

Ceiling Cassette in Piedmont

A Mitsubishi Electric ceiling cassette recessed flush into the ceiling — a discreet, four-way air distribution option for homeowners who want efficient heating and cooling without a unit on the wall.

View story →

Wall-Mounted Unit in San Mateo

A wall-mounted ductless mini-split head installed high on a kitchen wall, delivering quiet, efficient heating and cooling to the room without any ductwork.

View story →

Heat Pump in Castro Valley

A quiet, high-efficiency Bosch inverter heat pump — a popular choice for Bay Area homeowners who want strong performance with low operating noise.

View story →

Air Handler in San Francisco

A Mitsubishi Electric air handler installed as part of a heat pump system in the lower level of a San Francisco home, with neatly wrapped insulated ductwork distributing conditioned air throughout the house.

View story →

Air Handler in Lafayette

A Carrier air handler installed as the indoor half of a heat pump system in Lafayette, for quiet, balanced air distribution.

View story →