Recent heat pump projects completed by Galaxy across the Bay Area.
Explore Galaxy project stories on the map. Every pin is an illustrative residential-area display point within its listed city, selected for map spacing and privacy; it is not an actual job address and does not identify the job neighborhood. 30 stories across 23 cities
Loading map…
Browse our work by system type or city, then open a story to see the photos and details.
Replaced a nine-year-old air conditioner and 23-year-old furnace with an American Standard 4-ton inverter heat pump and an 80% AFUE two-stage gas furnace. The new dual-fuel system combines electric heating and cooling with the option of gas heat.
Completed June 25, 2026
View projectUpgraded a 2,300-square-foot ranch-style home with an American Standard 4-ton inverter heat pump and matching horizontal evaporator coil. The project included a Nest WiFi thermostat, enlarged return filter grille, new refrigerant line set, and electrical and attic installation improvements.
Completed July 23, 2026
View projectReplaced a 19-year-old gas furnace and 5-ton AC system with a Mitsubishi SUZ-AK48NL heat pump and SVZ-AP48NL air handler. Installation included a new refrigerant line set, MHK2 thermostat, kumo cloud connectivity, and extended 12-year labor coverage alongside the manufacturer’s 12-year parts warrant
Completed April 14, 2026
View projectMitsubishi single-zone mini-split outdoor unit installed for a home in Concord.
View projectMitsubishi SMART MULTI heat pump outdoor unit installed for a home in San Mateo.
View projectMitsubishi heat pump outdoor unit installed on a commercial rooftop in Burlingame.
View project
A compact Carrier heat pump positioned beside the home on an equipment pad, with a nearby wall-mounted electrical disconnect. The side-discharge design offers a lower-profile alternative to a traditional top-discharge unit.
View story
Two Carrier heat pumps set on individual equipment pads alongside a landscaped yard. The photo shows the equipment placement and insulated refrigerant connections for a two-unit installation.
View story
A wall-mounted mini-split indoor unit positioned high above a window during a room renovation. Its placement leaves the floor area open while delivering conditioned air directly into the room.
View story
A close-up of a wall-mounted ductless indoor unit, showing its compact cabinet and air outlet. This style of installation provides room-level comfort without a floor-standing indoor appliance.
View story
A Mitsubishi Electric dual-fan outdoor unit positioned beside the home’s blue siding, with refrigerant piping routed along the wall. The installation keeps the outdoor equipment close to the building.
View story
A ductless indoor unit mounted near the ceiling, leaving the wall and floor space below available for everyday use. The photo shows how a compact indoor unit fits into an existing room.
View story
A wall-mounted mini-split integrated into a finished room, above the window and beside a dark accent wall. The compact indoor unit provides a room-level comfort option without taking up floor space.
View story
A compact Mitsubishi Electric outdoor unit set on an equipment pad beside the house. A covered line-set route follows the exterior wall, keeping the visible piping grouped together.
View story
A Mitsubishi Electric dual-fan heat pump installed alongside the home on an equipment pad. The photo shows the tall outdoor cabinet, nearby disconnect, and wall-routed connections.
View story
A Mitsubishi SMART MULTI dual-fan condenser set on a level pad with a wall-mounted disconnect, providing efficient zoned heating and cooling for multiple rooms in this San Jose home.
View story
A Carrier heat pump installed on a new equipment pad beside the garage of this Union City home, giving the homeowner all-electric heating and cooling from a single system.
View story
A space-saving Daikin heat pump tucked neatly into a narrow side yard — a practical setup for Livermore homes, ready for the area’s hot summers and cool winters.
View story
A 30,000 BTU Mitsubishi heat pump installed for a San Francisco home — quiet, efficient, all-electric comfort that suits the city’s mild, foggy climate.
View story
A Mitsubishi heat pump installed on the roof of a San Francisco home — a practical solution where ground-level space is limited in the city’s tightly packed neighborhoods.
View story
A Mitsubishi three-zone heat pump system for an Alamo home, conditioning three separate areas independently for room-by-room comfort and energy savings.
View story
A Mitsubishi SMART MULTI system installed for a Diablo residence, pairing a single outdoor unit with multiple indoor zones for flexible, high-efficiency comfort.
View story
A Mitsubishi heat pump installed for a Fremont home making the move to clean, efficient electric heating and cooling.
View story
A Carrier heat pump providing reliable, year-round comfort for a home on the island of Alameda.
View story
A Rheem RDAY18 heat pump installed for a Lafayette home — an efficient, all-electric upgrade suited to the East Bay hills’ variable climate.
View story
A Mitsubishi Electric ceiling cassette recessed flush into the ceiling — a discreet, four-way air distribution option for homeowners who want efficient heating and cooling without a unit on the wall.
View story
A wall-mounted ductless mini-split head installed high on a kitchen wall, delivering quiet, efficient heating and cooling to the room without any ductwork.
View story
A quiet, high-efficiency Bosch inverter heat pump — a popular choice for Bay Area homeowners who want strong performance with low operating noise.
View story
A Mitsubishi Electric air handler installed as part of a heat pump system in the lower level of a San Francisco home, with neatly wrapped insulated ductwork distributing conditioned air throughout the house.
View story
A Carrier air handler installed as the indoor half of a heat pump system in Lafayette, for quiet, balanced air distribution.
View storyReady for your next home comfort project? Schedule a free estimate with Galaxy.
