If you own or manage a commercial building, the big metal box on your roof has a name: a packaged rooftop unit, or RTU. It heats, cools, and ventilates your space — and when it dies in August, every tenant knows about it within the hour.
Here's what a replacement actually costs, what drives the price, and how to tell when you're throwing good money after bad on repairs.
The short answer on cost
For a straightforward like-for-like RTU replacement, plan on roughly $3,000–$5,000 per ton installed. What that looks like in practice:
- 3–5 ton unit (small office, retail shop): $14,000–$18,000 installed
- 6–10 ton unit (restaurant, mid-size office): $18,000–$30,000 installed
- 12.5–25 ton unit (larger commercial space): $22,000–$65,000 installed
Those are planning ranges, not quotes. A real quote depends on your roof, your ductwork, your electrical, and how the crane gets to the unit. Two identical buildings can get very different numbers.
One more thing shaping prices right now: commercial HVAC equipment costs about 60% more than it did in 2020. Budgeting off a number you heard five years ago will leave you short.
What you're actually paying for
The unit itself is often less than half the invoice. A typical 5-ton replacement might break down like this: ~$8,000 for the equipment, ~$6,000 for labor, ~$1,200 for the crane, ~$1,300 for electrical and curb work, ~$1,000 for permit and disposal of the old unit — roughly $17,500 all in. (Bay Area labor runs higher than national averages, so local quotes land at the upper end of the ranges above.)
The line items that surprise people:
- Crane and rigging. The old unit comes off and the new one goes on by crane. Tight parking lots, busy streets, and multi-story buildings all add cost.
- Curb adapter. New units rarely match the old roof curb exactly. An adapter bridges the gap — cheaper than rebuilding the curb, but it's a real line item.
- Electrical. Older units on newer electrical service (or vice versa) can mean panel or disconnect work.
- Ductwork transitions. If the new unit's footprint or airflow differs, the duct connections need rework.
- Controls. A new unit tied into an old thermostat — or better, a building automation system — needs setup and commissioning.
- Permits and Title 24. California's energy code applies to commercial replacements. Permits, inspections, and compliance paperwork are part of every legitimate job.
Repair or replace? The honest math
RTUs typically last 12–20 years depending on maintenance and runtime. Here's how we think about the call:
- Over 15 years old and needing a major repair? Put the repair quote next to a replacement quote. If the repair is more than a third of replacement cost, replacement usually wins — you're buying a warranty and 15+ more years instead of patching a unit on borrowed time.
- Still running R-22? That refrigerant was phased out years ago; what's left is expensive and getting scarcer. A leak on an R-22 unit is often the moment to replace.
- New units use low-GWP refrigerants (like R-454B) as required since 2025. They're the current standard, and technicians are trained on them.
- Energy bills creeping up? A 15-year-old RTU can use far more electricity than a current-code unit. For a building running cooling all summer, the operating savings are real money.
Which rooftop unit brands are worth considering?
The commercial RTU market is dominated by a handful of manufacturers, and honestly, they're all competent. The differences that matter:
- Carrier and Trane — the two biggest names in commercial. Widest model ranges, parts available everywhere, every commercial tech knows them. Usually priced at the top.
- Lennox — strong efficiency numbers, popular in California. Good factory support on the West Coast.
- Daikin — aggressive on commercial in recent years, competitive pricing, solid variable-speed options.
- American Standard — Trane's sister brand, same engineering underneath. We install a lot of these; reliable units with strong parts availability.
- Rheem — another brand we put in regularly. Good value for the specs, solid warranty support.
- York — often the value pick; less expensive for comparable specs.
Brand matters less than most people think. What matters more: correct sizing from a real load calculation, a clean curb and duct transition, and a contractor who commissions the unit properly at startup. A perfectly installed mid-tier unit will outlast a poorly installed premium one every time.
Why Bay Area businesses call Galaxy
We're a licensed C-20 HVAC contractor (CSLB #1076868) doing commercial work across the East Bay, San Francisco, and the Tri-Valley — rooftop replacements, commercial maintenance plans, and 24/7 emergency service when a unit quits on a 95-degree day.
What that means in practice: we walk the roof before quoting, we give you line-item pricing, we handle the permits and Title 24 paperwork, and we commission and test everything before we leave. If you have multiple units, we'll survey all of them and give you a straight priority list — replace now, plan for next year, or just keep maintaining.
Don't do this as an emergency
A planned RTU replacement happens on your schedule: you get multiple quotes, the crane is booked in advance, tenants get notice, and the work happens in a day or two. An emergency replacement in a heat wave means premium pricing, whatever unit is in stock (not necessarily the right one), and unhappy tenants.
If your units are 12+ years old, have us look at them during a maintenance visit. We'll tell you straight which ones have years left and which ones you should start budgeting for — no scare tactics.
The bottom line
A commercial RTU replacement is a five-figure project, and the equipment is only part of it. The contractors worth hiring will walk the roof, look at the curb and the electrical, and give you a line-item quote — not a number over the phone.
We do commercial HVAC across the East Bay, San Francisco, and the Tri-Valley: replacements, maintenance plans, and emergency service. Call (925) 578-3293 and we'll come take a look.
FAQ
How long does a commercial rooftop unit last? Typically 12–20 years with regular maintenance. Units that run long hours or sit in harsh rooftop conditions trend toward the shorter end.
How much does it cost to replace a 5-ton rooftop unit? Roughly $14,000–$20,000 installed for a straightforward swap in the Bay Area, including crane, curb adapter, electrical, permits, and disposal. Difficult access or ductwork changes push it higher.
Can you repair a rooftop unit instead of replacing it? Often, yes — compressors, motors, and control boards are all replaceable. But once a unit is past 15 years or a single repair exceeds about a third of replacement cost, replacement is usually the better investment.
How long does a rooftop replacement take? A straightforward swap is typically one to two days on site, plus lead time for equipment ordering (anywhere from days to weeks depending on the unit). Planning ahead avoids emergency premiums.
Do I need a permit to replace a rooftop unit in California? Yes. Mechanical permits and Title 24 energy code compliance apply to commercial HVAC replacements. Your contractor should handle both.
About the Author
Galaxy Heating & Air Conditioning
NATE-Certified HVAC Experts
Galaxy Heating & Air Conditioning has been serving the San Francisco Bay Area since 2008. Our team includes NATE-certified technicians and EPA-certified professionals specializing in residential HVAC systems, energy-efficient installations, and emergency repairs. We stay current with the latest HVAC technologies, California building codes, and manufacturer certifications to provide accurate, trustworthy information to Bay Area homeowners.
Need Professional HVAC Service?
Galaxy Heating & Air provides expert HVAC services throughout the San Francisco Bay Area. From installations to repairs, we're here to help 24/7.